Ignition switch/Turn signal Repair and Replacment
<Click on any image to enlarge!>

When I purchased the Scout from its previous owner the original ignition key switch no longer needed a key to turn. Also, the turn signal cancellation mechanism was worn out. I ordered a new matched ignition/door keyset from AT Scouts (complete with IH-stamped keys!) and planned to replace the cracked schoolbus-sized steering wheel with a smaller Grant unit

 

Lock plate tool.JPG (123362 bytes) steer wheel puller.JPG (106786 bytes)

 

 Steering wheel puller.JPG (155929 bytes)

turn signal spring.JPG (143871 bytes)

lockplate o ring.JPG (150077 bytes)

lockplate o ring2.JPG (145111 bytes)

Turn signal switch.JPG (196818 bytes)

 

Ignition release slot3.JPG (153354 bytes)

 

Back Home Next